Product Lineup Click the icon as follows, to check the details.

Structure Models Rod Dia. Bore mm 40 50 63 80 100 125 140 160 Double-acting Single-rod Standard B Rod

Specifications

Models		Double-acting Single-rod/Standard
Cylinder Bore		40,50,63,80,100,125,140,160
Mounting Style		SD,LA,FA,FB,CA,CB,TA,TC
Rod Type		B Rod
Norminal Pressure		21MPa
Max. Working Pressure		Rod Side:26.5MPa Head Side:24.5MPa
Proof Test Pressure		31.5MPa
Min. Operating Pressure		Rod Side: less than 0.45MPa Head Side: less than 0.3MPa
Operating Speed Range		8 to 300mm/s(Not including Cushion)
Operating Temperature		-10 to +80 Celsius Degree (But do not use when frozen)
Cushion Mechanism		Metal fitting system
Working Fluid		Petroleum-based fluid (For other working oil, refer to the table of working oil adaptability.)
Thread Tolerance		JIS 6g/6H
Standard Stroke
Stroke Tolerance
Accessories	Boots	Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex
	Rod End Attachment	Rod End Eye(T type)/Rod End Clevis(Y type)
	Others	Lock Nut

Note1)   Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. Note2) Please order longer dimension A of rod end threaded part if you use with lock nut. Note3) Conex of boots is the registered trade mark of Teijin,Ltd.

 

Allowable Fluid, Seal Material

Seal Material	Allowable Fluid
	Petroleum-based Fluid	Water-Glycol Fluid	Phosphate-Ester Fluid	Water in Oil Fluid	Oil in Water Fluid
1:Nitrile rubber
2:Urethan rubber
3:Fluoric rubber
6:HNBR

Note1)	The  marked items are applicable, while marked items are inapplicable. Please contact to us when you use  marked items.
Note2)	The  marked items are the recommended packing materials in case of the first priority to abrasion resistance.